Rotary Draw Accessories

Use Ercolina’s rotary draw accessories to expand the capabilities of your Ercolina machine. Not sure what you need? Call us and we will walk you through which accessories would best suit your requirements.

SPRAY BENDING LUBRICANT
Part# 810
One (1) 12 oz. can
Part# 811
Case of Nine (9) 12 oz. cans

CAP RAIL TOOLING
Available by special order only for MG030 Mega Bender®, TB60-TC, Top Bender Plus and SB48-TC machines.

CENTER FORMER REINFORCEMENT KIT
Available and interchangeable for all round tube or pipe center formers up to 7.5″ radius (R190).

Increases the rigidity of standard rotary draw tooling. Recommended for use when bending heavy wall material or solid bar stock.
Part# REINFKIT

COUNTERBENDING DIE SUPPORT
Required when bending radii 225mm and larger.
(Not required for TB80/TB100/TB130/TB180.)
Part# 050E (replaces standard vise)

ROLLER COUNTERBENDING DIES
Available for round and square profiles, roller dies are recommended when bending high tensile materials, solids, heavy wall profiles and rusted material.

Note: Roller dies must be positioned a minimum of 2½” from face of center former; failure to do so will cause machine damage. Not suitable for bends beyond 130°.
Part# 050I from ⅜” to 2⅜”
Part# 050J from 2½” to 3″
MUST SPECIFY MATERIAL DIAMETER WHEN ORDERING

ROTARY DRAW TIE BAR ACCESSORY
For use on Mega Bender MG030, TB60, SB48 and 48 Plus. Tie bar accessory should always be used when bending heavy wall profiles and solid materials.

PART# 030TIEBAR

MATERIAL EXTRACTION DEVICE FOR SQUARE TUBE
Extractor plate assists in square material extraction for profiles, solid and hollow. For use on 030 Mega Bender®, TB60-TC, Top Bender Plus and SB48-TC.

PART# FP500P1-A

COUNTERBENDING DIE ADAPTOR PLATE
Ercolina® is changing the mount of all counterbending dies to the drop-in, dovetail mount. The counterbending die adapter plate is a high quality, machined, aluminum bracket which enables users to quickly interchange between both mounting styles of counterbending dies.

PART# CBDAP